Lambrecht TH[pro] more accuracy, less power consumption

With the combined sensor TH[pro] you can measure relative humidity and air temperature very precisely with low power consumption. The sensor is used in meteorology, hydrology, building management and industry. Different versions and settings are possible. Besides Modbus, SDI-12 and NMEA, we can also supply you with customised versions. Do you have any questions? Please contact us at +31 (0)78 – 623 1126.

Proven environmental measurement technology:
The sensor TH[pro] is a combined measuring device for measuring relative humidity and air temperature. The sensor reads out through high precision and power-saving electronics.

  • C0ombined measuring device for demanding applications
  • Skilled humidity measuring device
  • Low-maintenance
  • Signal output: humidity RS422/Talke NMEA Modbus
  • Applicable in all climate zones
  • Matching protection cap for sensor type 8141.6 (recommended option)
  • For hydrology, building management, power stations and industry

Professional Line TH[pro] Sensor Ident-No. 00.08095.100001

 

Temperature

Measuring range: -40…+70 °C

Output: 0.1 °C

Accuracy: ± 0.1 K (0…60 °C) – ± 0.2 K (-40…0 °C) 1)

 

Relative humidity

Measuring range: 0…100 % r. F.

Outcome: 0.1 % r. F.

Accuracy: Typical ± 1,5 % (0…80 %) r. F. – ± 2 % (>80 %) r. F. 1) – Response time relative humidity (at v = 1.5 m/s): 30 s 2)

 

Technical data

Voltage: 4.8…33 VDC

Current consumption 3) 4 mA at 24 VDC – 6 mA at 12 VDC – 11 mA at 4.8 VDC

Housing: Aluminium special protection – IP 65 (housing) – M12 connector (4-pole)

Weight/Dimensions: approx. 80 g – H 140 mm x Ø 20 mm

Interface : Serial RS 422/ Talker – Baud rate 4800 – 1 Hz – 8 N 1 – Modbus RTU –

(SDI-12 on request)

Implementation: NMEA 0183 – WIMHU – WIMTA

Accessories: Sensor protection cover: 00.08141.600000 (with natural ventilation) 00.08141.600004 (with artificial ventilation)

  1. Ventilation protective cap recommended
  2. With filter membrane
  3. Without sealing resistor